|
Each face of this hard-coated EIFS monument
is 10' wide & features sandblasted & hand carved HDU(High
Density Urethane faces. Two men were able to carry
each half of this monument into this location. We can
crate & ship this type of monument anywhere in the country.
We can fly to your location to do the installation or hire a
local sign installer to do the installation.
This large EIFS monument features very
realistic faux stones around the base keeping the price very
reasonable.
Hard-coated 2-sided EIFS monument features a
block pattern on the base that emulates the base of the
building. The lettering & logo are router-cut aluminum
that has been painted corporate colors.
This monument features 23KT Italian gold
leafed individual stud mounted lettering & scrollwork.
Polished Corian panels flank each side of
the entrance to this private Golf Club. The logo &
lettering were engraved into the plaques the filled with
23KT gold leaf.
Special engineering was required to support
this cantilevered pylon sign. The cantilevered top is
internally lit & features a 3 row marquis section for
changeable lettering adding to the functionality.
The stone monument matches the same style
throughout the subdivision. The sign faces are made of
sandblasted HDU with a glass smalts background & hand gilded
23KT Italian gold leaf.
Faux finished molded HDU stones cover the
pillars. The sign face & pillar caps are made of HDU.
The letters are recessed into the HDU. Normally, the
background is recessed.
Faces on this pylon are made of solid brass
that has been router cut & lacquered to keep the brass from
oxidizing. The cut out letters have smoked Plexiglas
panels behind them & the whole pylon is internally soft lit
for a very elegant look.
A southern California company asked us to
make a stone monument for them. Obviously, since we
are in IL, we could not ship an actual stone monument.
We used a 10' wide sheet of HDU for the front & back of the
monument & smaller pieces for the ends. We sandblasted
the "mortar" areas around what now looks like stones & the
same 1 piece panel for the corporate info in the center.
Each stone was carved, sanded & faux finished. The
"limestone" cap is also made of HDU.
This "V" shaped monument is 12' tall.
The logo(we created) looks 3D but is actually flat.
The lower panels are changeable as tenants change.
|
This is another "V" shaped monument for a
dramatic look from two angles. The hard-coated EIFS
monument has HDU sandblasted faces & HDU faux finished stone
facing.
The brick pillars match the buildings in
this office park. The sandblasted HDU face is
supported by a grey painted wrought iron structure.
23KT Italian gold leaf was used for the border &
lettering/logo. The black background is glass
smalts(black crushed glass) The glass gives an
iridescent sparkle to the sign.
Internally lit pylon sign has a simple clean
look to potential customers.
This masonry monument has a Corian face
installed. The Corian panel is 12 feet long.
This monument is kind of like a "Swiss Army
Knife", featuring an 80# bronze bell is suspended within the
monument so it can be viewed from either side. The
marquis area in the center allows for changeable letters.
The acrylic panels are removable/changeable. The faces
are made of HDU.
The center stone base was built over a
hundred years ago. The new stone pillars were added.
The 2 faces are sandblasted, gold leafed HDU with blue glass
smalts in the background.
This is one of several pylons throughout
the campus. Non-illuminated aluminum panels work as
identification & wayfinding
A stone column supports the 8' long HDU
sandblasted sign face/blade. 2) 11/2" thick HDU panels
are mounted back to back with a marine plywood support
recessed into the center for stiffness & support. The
face protrudes through the column& has the logo "leaf" on
the short side too.
This monument features back-lit sections,
a timed open/close sign, full motion video screen and
address.
A hard-coated EIFS monument sits on top of
an internally lit box sign. The bricks are faux
finished HDU so the end panel can be removed to access the
bulbs & transformer. The church name is router cut
from 1/2" plastic & then covered with 22KT SignGold.
Another monument for another location of
Meadowbrook Manor. 12' wide, single sided with a
sandblasted & hand carved face.
A smaller, non-illuminated pylon to match
other signs on the property.
|
